3.7 Configure the multi-screen settings
[Multi-screen]
The cameras from which images are to be displayed on a multi-screen can be registered on the
“Multi-screen” page. (
®
“3.2.1 How to display the setup menu”, “3.2.2 How to operate the setup menu”)
[IP address]
Enter the IP address or the host name of the camera to be used for the multi-screen. 4 cameras can be
registered as a group and up to 4 groups (16 cameras) can be registered.
When the HTTP port number for the camera of which images are to be displayed had been changed, enter as
follows:
Example of entry:
–
Example when entering an IPv4 address:
http://192.168.0.10:8080
–
Example when entering an IPv6 address:
http://[2001:db8:0:0:0:0:0:1]:8080
To access the cameras using the HTTPS protocol, enter as follows:
Example of entry:
https://192.168.0.10/
•
Available number of characters:
1 - 128 characters
•
Default:
(Cam. 1) selfcamera, (Cam. 2 - 16) not registered
IMPORTANT
•
When connecting via HTTPS, installing the pre-installed certificate or CA certificate of the camera to
be displayed is required. For the installation method, refer to <Control No.: P0002> and <Control No.:
P0003> in the support video page of the support site.
•
This camera is specified when “selfcamera” is displayed for the IP address or host name.
Note
•
For further information about “Network Camera Recorder with Viewer Software Lite”, which is suited
to viewing images from several cameras, refer to our technical information website <Control No.:
C0301>.
•
When using the host name, it is necessary to configure the DNS settings of the PC to be used for the
multi-screen display. Refer to the network administrator for information on the DNS setting of PCs.
[Camera title]
Enter the title of the camera. The entered camera title will be displayed on a multi-screen.
•
Available number of characters:
0 - 20 characters
•
Unavailable characters:
" &
•
Default:
–
(Cam. 1) The model No. is displayed.
–
(Cam. 2 - 16) None (blank)
Note
•
When selecting a 16 split-screen, some characters of the camera title to be displayed may not be
displayed.
•
Even when “16:9” is selected for the aspect ratio, the multi-screen is displayed in 4:3.
Initial display
[Layout]
Select the layout for the initial display from the following:
4 Screens(1-4)/ 4 Screens(5-8)/ 4 Screens(9-12)/ 4 Screens(13-16)/ 9 Screens(1-9)/ 9 Screens(10-16)/ 16
Screens
Operating Instructions
105
3 Detailed Settings
