•
Default:
100 pics
•
Recording duration
Displays the time taken to save the selected “Number of images” at the selected “Transmission interval”.
Note
•
Depending on the speed or status of the network, you may not be able to transmit the set number
of sheets.
•
For alarm image SFTP transmission, images that failed to be transmitted to the SFTP server are
not saved on the SD memory card.
•
If you set alarm image SFTP transmission and SFTP periodic image transmission at the same time,
alarm image SFTP transmission has priority.
[Image capture size]
Select the resolution of images transmitted when an alarm occurs from the following.
JPEG(1)/JPEG(2)
•
Default:
JPEG(2)
SFTP periodic image transmission
[SFTP periodic image transmission]
Select “On” or “Off” to determine whether or not to perform SFTP periodic image transmission.
If “On” is selected, configure the SFTP server.
•
Default:
Off
IMPORTANT
•
If you will use SFTP periodic image transmission, you must configure the SFTP periodic image
transmission schedule in the [Schedule] tab on the “Schedule” page. (
®
relating to the schedules [Schedule]”)
[Directory name]
Enter the name of the directory where the image file to be transmitted will be saved.
For example, to specify the img directory under the root directory of the SFTP server, enter “/img”.
•
Available number of characters:
1 - 256 characters
•
Unavailable characters:
" & ;
•
Default:
None (blank)
[File name]
Enter the name of the image file to be transmitted, and select a file name format from the following.
•
Name w/time&date:
Uses “entered file name + transmission date and time + 00” as the file name.
•
Name w/o time&date:
Uses the entered file name as is. If you select “Fixed”, the transmitted file will always
be overwritten.
•
Available number of characters:
1 - 32 characters
•
Unavailable characters:
" & * / : ; < > ? \ ¦
•
Default:
None (blank)
Note
•
If “Name w/time&date” is selected, an “s” is added after “entered file name + transmission date and
time + 00” during summer time.
[Transmission interval]
Select a transmission interval from the following.
Operating Instructions
139
3 Detailed Settings
