Category
Indication
Description
<SD> An error occurs
in the SD memory card.
Check the status of the
SD memory card.
The SD memory card write process still generates data
loss. Make sure that the SD memory card is properly
recognized. If the card is not recognized, reboot the unit,
or remove and reinsert the SD memory card to check.
IMPORTANT
•
In order to be able to correctly use this function, format the SD memory card with the camera before
using it.
•
When using SD memory cards that have been used on other devices such as PCs, the correct
information may not be able to be displayed.
•
Up to 30 SD memory card logs can be saved to the built-in memory of the camera. When the saved
system logs have reached the maximum number, the newer logs will overwrite the older system logs.
Note
•
Refer to our support website for further information about the contents of the displayed statuses
(relating to the “Viewnetcam.com” service, the UPnP function, or the self check).
3.12.4 Reset the settings/Reboot the camera [Default reset]
Click the [Default reset] tab of the “Maintenance” page. (
®
“3.2.1 How to display the setup menu”, “3.2.2 How
to operate the setup menu”)
The setting data of the camera can be initialized and reboot of the camera can be performed on this page.
[Reset to the default (Except the network settings)]
Click the [Execute] button to reset the settings to the default. Note that the network settings will not be reset.
It is impossible to operate the camera for about 3 minutes after the initialization.
[Reboot]
Click the [Execute] button to reboot the camera. It is impossible to operate the camera for about 2 minutes
after rebooting the camera.
Note
•
Refer to the Basic Information in the supplied for more information about initializing the network
settings. (
®
“3.10.1 Configure the network settings [Network]”)
•
If “Diag.” of the alarm or e-mail notification function is selected, a notification of error will be sent to
“Destination E-mail address” or to “Destination of notification” when an error such as no SD memory
card insertion after the reboot occurs.
3.12.5 Settings data/backing up or restoring logs [Data]
Click the [Data] tab of the “Maintenance” page. (
®
“3.2.1 How to display the setup menu”, “3.2.2 How to
operate the setup menu”)
The settings related to backing up or restoring settings data, and saving logs can be configured in this section.
Backup
[Setup data]
Click the [Execute] button to backup the setup data of the camera to a PC.
Operating Instructions
165
3 Detailed Settings
