Stream recording(Alarm)
This setting is only available when “Stream(1)”, “Stream(2)”, “Stream(3)”, or “Stream(4)” is selected for
“Recording format” of the SD memory card, and “Alarm input” is selected for “Save trigger”.
[Pre alarm (recording) duration]
Determine whether or not to perform the pre alarm recording. Set the duration to save image data on the SD
memory card.
Off/ 1s/ 2s/ 3s/ 4s/ 5s/ 8s/ 10s/ 15s/ 20s/ 25s/ 30s/ 40s/ 50s/ 60s/ 90s/ 120s
•
Default:
Off
Note
•
The available values change depending on the bit rate and image capture size for “Stream” selected
for recording. As the selected bit rate increases, the available maximum value for the pre alarm
duration decreases.
[Post alarm (recording) duration]
Set the duration to save image data on the SD memory card after an alarm occurrence.
10s/ 20s/ 30s/ 40s/ 50s/ 60s/ 120s/ 180s/ 240s/ 300s
•
Default:
30s
* The actual recording time may sometimes be longer than the duration selected for this setting.
SD memory card error LED
[SD memory card error LED]
Select On/Off to determine whether to activate the red LED indicator when an SD memory card error is
detected.
SD memory card error detection conditions: Write error, read error, etc.
•
On:
When an error status is detected, the red LED indicator turns on.
•
Off:
When an error status is detected, the red LED indicator does not turn on.
•
Default:
Off
SD memory card information
[Remaining capacity]
Total capacity and remaining capacity of the SD memory card will be displayed.
Depending on the status of the SD memory card, the size indications will differ as follows.
Indication
Description
----------MB/----------MB
No SD memory card is inserted. Failed to obtain available capacity
due to error, etc.
**********MB/**********MB
The SD memory card is unformatted.
##########MB/##########MB
The SD memory card password lock cannot be unlocked.
Operating Instructions
73
3 Detailed Settings
