To delete the registered address, click the [Delete] button respective to the desired address.
•
VMD:
Notify by e-mail when motion is detected.
•
SCD:
Notify by e-mail when SCD has occurred.
•
Command alarm:
Notify by e-mail when a command alarm is entered.
•
Audio detection:
Notify by e-mail when audio detection has occurred.
•
Diag.:
–
When a notification of the remaining capacity of SD memory card has been provided
–
When the SD memory card has become full
–
When the SD memory card cannot be recognized
–
When deviation from the initial angle of view is detected, and when the deviation is corrected
[E-mail subject(Alarm)]
Enter the E-mail subject.
•
Available number of characters:
0 - 50 characters
•
Use the camera title:
The camera title will be displayed in the e-mail subject.
•
Cause of alarm:
Adds the cause of alarm to the E-mail subject.
[E-mail subject(Diag.)]
Enter the diagnostic e-mail subject.
•
Available number of characters:
0 - 50 characters
•
Use the camera title:
The camera title will be displayed in the e-mail subject.
[E-mail body(Alarm)]
Enter the E-mail body.
•
Available number of characters:
0 - 200 characters
•
Cause of alarm:
The cause of alarm %p% is added in the e-mail body. %p% is replaced by the cause of
alarm and sent.
–
For VMD alarm: “VMD”
–
For SCD alarm: “SCD”
–
For terminal alarm: Terminal name set in “Terminal 1”, “Terminal 2”, and “Terminal 3” of “Terminal
name”. (Example: If the name of Terminal 1 is “Terminal1”, it is “Terminal1”)
–
For command alarm: “CMD”
–
For audio detection alarm (AI sound classification, Gunshot): “Audio detection Gunshot”
–
For audio detection alarm (AI sound classification, Yell): “Audio detection Yell”
–
For audio detection alarm (AI sound classification, Vehicle Horn): “Audio detection Vehicle Horn”
–
For audio detection alarm (AI sound classification, Glass Break): “Audio detection Glass Break”
–
For audio detection alarm (AI sound classification, Other): “Audio detection”
•
Occurrence time:
The time of occurrence %t% will be added to the e-mail body. %t% will be replaced by
the time of occurrence of the alarm (HH:MM:SS) and sent.
•
Default:
–
Cause of alarm: Checked
–
Occurrence time: Checked
–
E-mail body: The %p% alarm was occurred at %t%.
Note
•
Notification E-mail will be sent with the message “The capacity of the SD memory card is full.” when
the SD memory card has become full, or “The SD memory card cannot be detected.” when mounting
of the SD memory card failed.
•
Entering alternative text into the E-mail body automatically adds the event or time when an alarm
occurs.
Alternative text cause of alarm: %p%, occurrence time: %t%
(Examples of use)
136
Operating Instructions
3 Detailed Settings
