If the Remaining ROM or RAM is not enough to install the extension software, it is necessary to
uninstall the other extension software that is already installed.
Refer to “[Uninstall] button” for how to uninstall the software.
2.
Click the [Choose File] button and designate “Ext. software”.
3.
Confirm that “Install new Ext. software” is selected and then click the [Execute] button. Installation of the
extension software will start. When the installation is completed, the name of the installed extension
software will be added to the “Software mng.” screen.
IMPORTANT
•
A space cannot be used in the name of the saving directory.
•
Be sure to use the designated file (extension: ext).
•
Do not turn off the power of the camera during the installation process.
•
Do not perform any operation during the installation process and wait until it completes.
4.
Obtain the registration key number and register the registration key.
Note
•
Depending on the type of extension software, you may need to register the registration key. For
information on how to obtain and register the registration key, refer to the instruction manual of the
extension software.
•
After registering the registration key, the camera will restart. After the camera restarts, make sure
that the registration key is registered before setting the extension software.
“Software mng.” screen
When the extension software is installed, unique information of the camera and the registration status of the
extension software will be displayed. On this screen, the following operations are available.
•
Uninstallation of the extension software
•
Display of the registration status detail screen
•
Display of the extension software setting screen
44
Operating Instructions
3 Detailed Settings
