Note
•
When “Off” is selected for “User auth.”, the authentication window will not be displayed before
displaying live images for the user name and password entries.
4.
Click the [OK] button after entering the user name and the password.
→
The “Live” page will be displayed. Refer to “1.1.2 About the “Live” page” for further information about
the “Live” page.
IMPORTANT
•
It is recommended to change the password periodically.
•
When displaying multiple H.265 (or H.264) images on a PC, images may not be displayed depending
on the performance of the PC.
Note
•
The maximum number of concurrent access user is 14 including users who is receiving H.265 (or H.
264) images and users who are receiving JPEG images. Depending on the set values for “Bandwidth
control(bit rate)” and “Max bit rate (per client)*”, the maximum concurrent access number may be 14
or less users. When 14 users are concurrently accessing, the access limit message will be displayed
for users who subsequently attempt to access.
•
If you set the “Stream transmission” (
®
“Stream(1)/ Stream(2)/ Stream(3)/ Stream(4)”) to “On”, an H.
265 (or H.264) image will be displayed based on the settings of the “Stream encoding format”. If you
set the “Stream transmission” (
®
“Stream(1)/ Stream(2)/ Stream(3)/ Stream(4)”) to “Off”, a JPEG image
will be displayed. A JPEG image can be displayed even if the “Stream transmission” is set to “On”, but
in that case, the transmission interval of the JPEG image will be restricted as follows.
Image capture mode
Stream transmission
On
Off
4:3 mode(30fps mode)
max. 5 fps
max. 30 fps
16:9 mode(30fps mode)
4:3 mode(25fps mode)
max. 4.2 fps
max. 25 fps
16:9 mode(25fps mode)
4:3 mode(15fps mode)
max. 5fps
max. 15fps
4:3 mode(12.5fps mode)
max. 4.2fps
max. 12.5fps
•
The refresh interval may become longer depending on a network environment, PC performance,
photographic subject, access traffic, etc.
Operating Instructions
11
1 Operations
