•
Default:
None (blank)
[Location]
Enter the name of the location where the camera is installed.
•
Available number of characters:
0 - 32 characters
•
Default:
None (blank)
[Contact]
Enter the E-mail address or the phone number of the SNMP manager.
•
Available number of characters:
0 - 255 characters
•
Default:
None (blank)
[SNMP trap setting]
Set On/Off of the SNMP trap.
•
Default:
Off
[Destination of Trap] - [Address]
Enter the destination address of the SNMP trap.
•
Available number of characters:
1 - 128 characters
•
Available characters:
Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the
hyphen (-).
•
Default:
None (blank)
[Destination of Trap] - [Port number]
Enter the port number of the destination address of the SNMP trap.
•
Available port number:
1 - 65535
•
Default:
162
The following port numbers are unavailable since they are already in use.
20, 21, 22, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 443, 554, 995, 10669, 10670, 59000 - 61000
[SNMPv2c] - [Community]
Enter the community name of the destination address of the SNMP trap.
•
Available number of characters:
0 - 32 characters
•
Unavailable characters:
2-byte characters
•
Default:
None (blank)
IMPORTANT
•
When using the SNMP trap function, it is necessary to enter the community name. When no community
name is entered, the SNMP trap function will not work.
Trap setting
[SNMP Generic trap] - [coldStart] - [On/Off]
When the check box is checked, a trap (SNMPv2-MIB::coldStart) will be sent.
•
Default:
Not checked (Off)
[SNMP Generic trap] - [coldStart] - [Trap string]
When a camera startup trap is to be extended and sent, set the string of characters of the extended trap.
•
Available number of characters:
0 - 20 characters
•
Available characters:
0-9, A-Z, a-z and the following marks.
! " # $ % & ' ( ) * + , - . / : ; = ?
•
Default:
cold start
146
Operating Instructions
3 Detailed Settings
