Note
•
When “Off” is selected for “Overwrite” and the available size of the SD memory card is “0 MB”, images
will not be saved on the SD memory card. When the notification function is on, a notification will be
sent to the registered addresses and destinations of the TCP alarm notification when the SD memory
card becomes full. (
®
“3.8.2.1 Configure settings relating to alarm E-mail notifications”,
“3.8.8 Configuration of the settings relating to alarm notification [Notification]”)
[Format]
To format the SD memory card, click the [Execute] button.
IMPORTANT
•
Before formatting the SD memory card, it is necessary to select “Use” for “SD memory card” on the
[SD memory card] tab of the “Basic” page (
®
“3.5.2 Configure the settings relating to the SD memory
•
Use the SD memory card after formatting it using the [SD memory card] tab. If using the SD memory
card that has not been formatted on the [SD memory card] tab, the following functions may not work
correctly.
–
Save/obtain alarm images
–
Save/obtain images saved manually
–
Save/obtain images in accordance with the schedule settings
–
Save/obtain images recorded using the SD memory recording function of our network disk recorder
–
Save/obtain images that failed during SFTP periodic image transmission
–
Play/download images on the SD memory card
•
When an SD memory card is formatted while another user is in operation, the operation will be
canceled.
•
It is impossible to access the SD memory card during the process of formatting.
•
All data saved on the SD memory card will be deleted when the SD memory card is formatted.
•
Do not turn off the power of the camera during the process of formatting.
•
After formatting the SD memory card, available size may be smaller than the total size since the default
directory is automatically created in the SD memory card.
•
Use a microSD memory card dedicated to i-PRO cameras.
•
When repeatedly recording images on an SD memory card using the auto overwrite function, make
sure to use an SD memory card with high reliability and durability.
•
Use the SD memory card that complies with UHS-1(Ultra High Speed-1) in the case of SD Speed
Class10.
3.5.3 Configure the settings relating to alteration detection
[Alteration detection]
Selecting “Alteration detection” enables detection using exclusive software when the data on the SD memory
card is altered.
Alteration detection supports video files (MP4 format) only.
Refer to “3.5.4 How to configure alteration detection settings” for information on how to configure “Alteration
detection”.
For further information about exclusive software for alteration detection and how to use it, refer to our technical
information website <Control No.: C0304>.
Note
•
When “Alteration detection” is used, it is necessary to set either of “Stream(1)”, “Stream(2)”,
“Stream(3)” or “Stream(4)” for “Recording format”.
74
Operating Instructions
3 Detailed Settings
