Getting Started
Network Camera
Model No.
BL-C1A
Please read the Important Information manual before using.
This Getting Started explains how to connect, set up and mount the
camera. See the Operating Instructions on the Setup CD-ROM for
details about the camera's features.
•
If you cannot complete the setup, see the Troubleshooting manual
on the Setup CD-ROM
.
Indoor Use Only
Trademarks
•
Adobe, Acrobat and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
•
Microsoft, Windows and ActiveX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
•
Screen shots reprinted with permission from Microsoft Corporation.
•
All other trademarks identified herein are the property of their respective owners.
•
This software is based in part on the work of the Independent JPEG Group.
Abbreviations
•
UPnP is the abbreviation for "Universal Plug and Play".
•
"Network Camera" is called "Camera" in this manual.
•
"Setup CD-ROM" is called "CD-ROM" in this manual.
1.
Connect the camera to your router.
Router
(Customer-provided)
WAN
4
3
2
1 LAN
•
Confirm that the indicator lights green after about
1 minute.
•
When you operate the camera, the power outlet
should be near the camera and easily
accessible.
•
Use only specified Panasonic AC adaptor (Order
No.PQLV206Y).
•
If the indicator does not light green, see page 3
and 4 of Troubleshooting on the CD-ROM.
•
The camera may become warm. This is not a
malfunction.
The indicator
lights green.
AC adaptor
Ethernet cable
(Straight Cat5 cable,
Customer-provided)
Modem
Internet
PC
(For setup and display)
(Customer-provided)
Connect the Ethernet cable (customer-
provided) to the camera and the router.
The PC should be connected to the router, and to the Internet, in advance.
Plug the AC adaptor into the outlet.
Connect the AC adaptor cord to the DC In
jack.
Panasonic System Networks Co., Ltd. 2005
PQQX14937YA
KK0905YT2020
