www.hygiena.com
40
6.12. Manual PO
The Manual PO method is not standardly activated for use, to activate this method please contact the
supplier. After performing all the initializing steps, the Autosampler III is ready to start pipetting samples.
For manual sampling of boxes without barcodes, follow the steps listed below.
1.
Fill the stacker with plates. Make sure the plate barcodes are facing towards the right.
2.
Place the boxes on the Autosampler III.
3.
If the doors are open, close the doors and press the "Lock Doors" button.
4.
Choose the "ManualPO" method from the drop-down menu.
