HunterLab EasyMatch QC, Руководство пользователя

Страница: 237 / 366

EasyMatch QC User’s Manual Version 2.1
11G-10 UltraScan VIS
Foot Switch Assembly
Pressing the foot switch performs the same function as the
macro switch on the front of the sensor. Install the foot
switch by plugging it into the round connector on the back
of the UltraScan VIS.
Compression Clamp Kit
This option provides a compression clamp assembly for the UltraScan VIS. This assembly is used for
compressing fibers into a compact mass that permits repeatable color analysis. The assembly, sans
modified port insert and glass sample cup, may also be used to hold carpet, fabric, and other soft
samples at the reflectance port with constant pressure.
The option consists of the following components:
•
Modified port insert
•
Protective cap for port plate
•
Glass 2.5-inch (64-mm) sample cup
A compressed air source and filter dryer are also required.
To install the compression clamp assembly:
1. Remove the original port insert and replace it with the modified port insert (after removing the
protective cap). The white lining of the insert should face in toward the instrument.
2. Replace the original sample clamp with the modified sample clamp.
•
Modified sample clamp
•
Ten feet of 1/4-inch tubing line
•
Pressure valve.