HunterLab EasyMatch QC, Руководство пользователя

Страница: 178 / 366

EasyMatch QC User’s Manual Version 2.1
7-10 The Options Menu
On the Differences tab, set all tolerances you wish to assign based on color differences. Choose the
difference from the Selected Difference drop-down box and the illuminant/observer combination from
the Illuminant/Observer drop-down box. Then enter the upper and lower tolerance limits for the
difference for this illuminant/observer combination. Then enter tolerances for all other differences and
illuminant/observer combinations desired by choosing each one individually and typing the tolerance
values. It is not necessary to click
OK after entering each set of tolerances. Clicking OK once will
cause all tolerances entered to be accepted.
On the Shade tab, enter the tolerance you wish to use for the first, second, and third traces, which will
be the three parameters of your color scale (i.e., L*a*b*, L*C*h). Also select the number of shade
blocks to be contained within your pass/fail tolerance. For instance, If you choose 5, the blocks within
your tolerance will be 3, 4, 5, 6, and 7. In the example shown above, the pass/fail tolerance is 0.2 for
each color scale parameter, and 5 shade blocks will fit within that tolerance value.