●
Ensure that the ladder is securely positioned. The recommended angle for a
ladder against the floor is 75 degrees, as shown in the following figure. An
angle rule can be used to measure the angle. Ensure that the wider end of the
ladder is at the bottom, or protective measures have been taken at the
bottom to prevent the ladder from sliding.
●
When climbing a ladder, take the following precautions to reduce risks and
ensure safety:
–
Keep your body steady.
–
Do not climb higher than the fourth rung of the ladder from the top.
–
Ensure that your body's center of gravity does not shift outside the legs
of the ladder.
Drilling Holes
When drilling holes into a wall or floor, observe the following safety precautions:
NO TICE
Do not drill holes into the equipment. Doing so may affect the electromagnetic
shielding of the equipment and damage components or cables inside. Metal
shavings from drilling may short-circuit boards inside the equipment.
●
Obtain the consent from the customer and subcontractor before drilling.
●
Wear goggles and protective gloves when drilling holes.
●
When drilling holes, protect the equipment from shavings. After drilling, clean
up any shavings that have accumulated inside or outside the equipment.
Moving Heavy Objects
D ANGER
When removing a heavy or unstable component from a cabinet, be aware of
unstable or heavy objects on the cabinet.
FusionModule2000-S Smart Modular Data Center
User Manual
1 Safety Information
Issue 03 (2021-07-15)
Copyright © Huawei Technologies Co., Ltd.
9
