No.
Parameter
s
Note
6
Ground
color: red,
bright gray
Red indicates that a critical alarm is generated,
as shown in
.
Bright gray indicates that the device is operating without
any critical alarms,
as shown in
.
NO TE
If teamwork succeeds, the teamwork icon is green. If teamwork fails, the teamwork icon is
red. If teamwork mode is disabled, the teamwork icon is gray.
----End
Follow-up Procedure
After you have completed the settings, perform the following checks to confirm
whether the teamwork control is available:
1. Check whether the device number on the topology is the same as the actual
device number.
–
If yes, go to
.
–
If no, check the cable connection and the settings of teamwork control
parameters.
2. Check whether the number of active devices on the topology is the same as
the actual device number.
–
If yes, go to
.
–
If no, check the cable connection and the settings of teamwork control
parameters.
3. Check whether the number of standby devices on the topology is the same as
the actual device number.
–
If yes, go to
.
–
If no, check the cable connection and the settings of teamwork control
parameters.
4. Check whether the number of online devices on the topology is the same as
the actual device number.
–
If yes, the check is complete.
–
If no, check the cable connection and the settings of teamwork control
parameters.
NetCol8000-E220 Modular Indirect Evaporative
Cooling System
User Manual
4 Power-on and Commissioning
Issue 06 (2020-08-19)
Copyright © Huawei Technologies Co., Ltd.
104
