HPE XP7 Automation Director, Руководство пользователя

Страница: 118 / 363

Example: Error encountered in parameters
KNAE03000-I The setremoteconnection command will now start.
KNAE03333-E A required parameter was not found (parameter name: XXXXX, line
number: 12345). Specify the required parameter, and then try again.
KNAE03334-E Unnecessary parameter has been specified (parameter name: XXXXX,
line number: 12345). Delete the specified parameters, and then try again.
KNAE03002-E The setremoteconnection command ended abnormally (12345).
deleteremoteconnection command
Functions
The
deleteremoteconnection
command performs the following function:
Deletes a succession of agentless connection-destination definitions based on their definition IDs. To
determine the definition ID of the agentless connection-destination definition, use the
listremoteconnections
command.
Syntax:
deleteremoteconnection {/id Definition ID
/user UserName
{/password Password | /passwordfile PasswordFile } | /help}
Permission
• Automation Director users must have Admin permissions.
• Only users who have OS administrator permissions (members of the Administrators group) are
allowed to run the
deleteremoteconnection
command.
• If a user who does not have the necessary permissions runs the command, the following message is
visible requesting promotion of the user's permissions:
KNAE03226-W The user does not have permission to execute the command.
Options
Option Description
/id
Specifies the single-byte numerical definition ID (between 1 - 64 characters)
of the agentless connection-destination definition information to be deleted. If
the specified ID does not exist, an error is generated.
/user
Specifies the name of the user (must have Admin permission) executing the
command. The user name can consist of any single-byte alphanumeric
characters including ( ! # $ % & ' ( ) * + - . = @ \ ^ _ |) from 1 - 256 characters
in length. The user name is case sensitive.
Table Continued
118 deleteremoteconnection command