Property
Header Section (first
line)
Data Section (second and subsequent
lines)
SSH authentication method
SSH authentication
method
When the protocol is not SSH, null
character ("")
When the protocol is SSH, any one of
the following:
• Password Authentication
• Public Key Authentication
• Keyboard Interactive Authentication
User ID
User ID
User ID of the user who logs on to the
connection-destination host.
Password
Password
Fixed to "*******"
Super user's password
Super user's password
Fixed to "*******"
Status
Connection Status
Connection Successful, Error, Unknown,
or -.
Last connection time
Connected Time
The last connection time.
Usage example: To output a list of registered agentless connection-destination definitions to a file
listremoteconnections /file bbbbb /user xxxxx /password yyyyy
Example: Output message for successful list
KNAE03000-I The listremoteconnections command will now start.
KNAE03001-I The listremoteconnections command ended normally.
Example: Output message for unsuccessful list
KNAE03000-I The listremoteconnections command will now start.
KNAE03002-E The listremoteconnections command ended abnormally (12345).
Example: Typical output file
"Id","Method","IP Address/Host Name","Service Group","Authentication
","Protocol","SSH Authentication Method","User ID","Password","Super User's
Password"
"1","IPv4","10.197.158.107","All Service
Groups","Enable","Windows","","Administrator@DOM1","********",""
"10","HostName","vmc006","All Service Groups","Enable","SSH","Password
Authentication","ao","********","********"
"100","IPv6","fd00::6172:839:2e15:f6f3:da7e"," All Service Groups
","Enable","Telnet","","","",""
"1000","HostName","vmc007"," All Service Groups ","Disable","","","","",""
112
CLI commands
