Using the Computer Setup (F10) Utility to Reset CMOS
To reset CMOS using the Computer Setup (F10) Utility:
1.
Access the Computer Setup (F10) Utility menu.
2.
When the Computer Setup message appears in the lower-right corner of the screen, press
F10
,
and then press
Enter
to bypass the title screen, if necessary.
If you do not press
F10
while the message is displayed, the workstation must be restarted to
access this utility.
3.
From the Computer Setup (F10) Utility menu, select
File>Default Setup
.
This restores the settings that include boot sequence order and other factory settings. However, it
does not force hardware rediscovery.
4.
Choose
Restore Factory Settings as Default
, and the press
F10
to accept.
5.
Select
File->Apply Defaults and Exit
, and then press
F10
to accept.
6.
Reset the workstation passwords and configuration information, such as the system date and time.
NOTE:
This step does not clear the passwords.
220
Chapter 8 Configuring password security and resetting CMOS
ENWW
Содержание Z400 - Workstation
Страница 1: ...HP Z400 Workstation Maintenance and Service Guide ...
Страница 4: ...iv About this guide ENWW ...
Страница 12: ...Index 241 xii ENWW ...
