![background image](http://html.mh-extra.com/html/hp/jetdirect-250m/jetdirect-250m_user-manual_163690008.webp)
Troubleshooting during
installation
If you encounter problems during installation, check these steps:
Test page does not print.
Try these steps:
●
Check that the print server is firmly seated in the printer's LIO
slot and that the status light is ON (solid or blinking green).
●
If the printer has an LCD panel, correct any errors that are
displayed.
●
If there is still a problem, call HP technical support.
Installer does not discover printer.
Try these steps:
●
Check that the print server is firmly seated in the printer's LIO
slot and that the status light is ON (solid green). Wait 2 minutes
for the print server to poll the network, then run the installer
again.
●
Check that the network cable is securely connected to the print
server and that one of the link lights is ON (solid green). Wait 2
minutes for the print server to poll the network, then run the
installer again.
●
Perform a cold reset: unplug the print server from the printer,
then plug it in while pressing the Test button. Wait 2 minutes for
the print server to poll the network, then run the installer again.
●
If there is still a problem, follow the hardware troubleshooting
procedure (see next paragraph).
Other problems:
Run the interactive hardware troubleshooter. Answer
the questions by clicking on the buttons.
Click here for the troubleshooter.
What the Status light means:
OFF: not receiving power.
Green, ON solid: on and ready.
Green, blinking slowly: not ready or self-test
in progress
or no network connection (check link lights).
Содержание jetdirect 250m
