To set configuration parameters, you must set up a Telnet
connection from your system to the HP Jetdirect print server.
1
Type the following at the system prompt:
telnet <IP address>
where
<IP address>
may be the assigned address from
BOOTP, RARP, DHCP, the printer control panel, or the
default IP address. The default IP address is 192.0.0.192.
The
<IP address>
is listed on the Jetdirect
configuration page (see
HP Jetdirect Configuration Page
).
2
A connection to the HP Jetdirect print server will be
displayed. If the server responds with "
connected to
IP address
", press [Enter] twice to make sure that the
Telnet connection is initialized.
3
If prompted for a user name and password, enter the
correct values.
Содержание jetdirect 250m
