![background image](http://html.mh-extra.com/html/hp/jetdirect-250m/jetdirect-250m_user-manual_163690262.webp)
09
LAN ERROR-
BABBLE
Check the network connections. If the connections are intact, run the power-on self-test:
turn the printer off, then on again. If the error persists, replace the print server.
0A
LAN ERROR-
NOSQE
Check the network connections. If the connections are intact, run the power-on self-test:
turn the printer off, then on again. If the error persists, replace the print server.
0C
LAN ERROR-
RECEIVER OFF
There may be a problem with your network cabling or the print server. Check the cabling
and connectors on your Ethernet network. If you cannot find a problem with your network
cabling, run the power-on self-test: remove and re-attach the power module connector on
the print server. If the error persists, there is a problem with the print server.
0D
LAN ERROR-
TRANSMITTER
OFF
There may be a problem with your network cabling or the print server. Check the cabling
and connectors on your Ethernet network. If you cannot find a problem with your network
cabling, run the power-on self-test: remove and re-attach the power module connector on
the print server. If the error persists, there is a problem with the print server.
0E
LAN ERROR- LOSS
OF CARRIER
Check the network connections. If the connections are intact, run the power-on self-test:
remove and re-attach the power module connector on the print server. If the error
persists, replace the print server.
10
LAN ERROR-
UNDERFLOW
There may be a problem with your network cabling or the print server. Check the cabling
and connectors on your network. If you cannot find a problem with your network cabling,
run the power-on self-test: remove and re-attach the power module connector on the print
server. If the error persists, there is a problem with the print server.
11
LAN ERROR-
RETRY FAULTS
There is a problem with your network cabling or external network configuration. Verify
operation of the hub or switch port.
12
LAN ERROR- NO
LINKBEAT
With a 10Base-T or 100Base-TX port connected, Link Beat is not sensed. Check the
network cable, and verify that the concentrator or hub is providing Link Beat.
13
NETWORK
RECONFIG - MUST
REBOOT
Reset or power cycle the print server to enable the new configuration values.
15
CONFIGURATION
ERROR
The configuration information for the NetWare functions is not stored correctly on the
HP Jetdirect print server. Use the installation software, embedded web server, or other
tools to reconfigure the print server. If this error persists, there may be a problem with the
HP Jetdirect print server.
16 NOT
CONFIGURED
The HP Jetdirect print server has not been configured for NetWare. Use the installation
software, embedded web server, or other tools to configure the print server for NetWare
networks.
Содержание jetdirect 250m
