HP jetdirect 250m, Руководство пользователя

Страница: 263 / 295

17 UNABLE TO
FIND SERVER
(Ethernet) The HP Jetdirect print server was unable to find the NetWare print server
(Remote Printer mode) or file server (Queue Server mode). (There was no response to
service queries for advertising print servers or file servers that matched the configured
print server or file server name.)
Make sure that the print server or file server is running and that the print server or file
server name configured on the HP Jetdirect print server matches the actual name used by
the print server or file server. Also make sure that all cables and routers are functioning
correctly.
18 PASSWORD
ERROR
The HP Jetdirect print server detected that the password for the NetWare print server
object is wrong. Use a NetWare utility (such as PCONSOLE) to erase the password for the
print server object. When the HP Jetdirect print server logs on again, it sets a new
password.
Note: When multiple file servers are configured, the error is only displayed on the
configuration page if none of the file servers are connected.
19 NO QUEUE
ASSIGNED
The HP Jetdirect print server detected that the print server object has not been assigned
any queues to service. Assign queues to the print server object using printer installation or
NetWare utilities.
Note: When multiple file servers are configured, the error is only displayed on the
configuration page if none of the file servers were successfully connected.
1A PRINTER
NUMBER NOT
DEFINED A NetWare printer number for this printer has not been configured. Assign a valid printer
number to the HP Jetdirect print server. Use a NetWare utility (such as PCONSOLE), the
Jetdirect embedded web server, or other tool to assign a printer number.
1B PRINTER
NUMBER IN USE
The NetWare printer number assigned to the printer is already in use by another printer.
Assign an unused printer number. This may also occur when a printer is power cycled, in
which case the error goes away after the print server times out and detects the lost
connection.
1C PRINT SERVER
NOT DEFINED
The file server does not have a print server object that corresponds to the specified
NetWare node name. Use printer installation software, a NetWare utility (such as
PCONSOLE), or other tool to create the print server object.
When the HP Jetdirect print server is configured for multiple file servers, the error is only
displayed on the configuration page if none of the file servers made the connection.
1D UNABLE TO
CONNECT TO
SERVER Remote Printer mode error: The HP Jetdirect print server was unable to establish an SPX
connection with the NetWare print server. Make sure that the NetWare print server is
running and that all cables and routers are functioning correctly.
1E FAIL
RESERVING
PRINTER NUM
The SPX connection to the print server was lost when the HP Jetdirect print server
attempted to reserve the printer number. This indicates a possible network problem, or a
problem with the print server. Make sure all cables and routers are functioning correctly.
Try restarting the print server.
1F ERR
NEGOTIATING
BUFFER SIZE
A failure was detected when selecting the buffer size to be used when reading print data
from the file server. This may indicate a network problem.
When the HP Jetdirect print server is configured for multiple file servers, the error is only
displayed on the configuration page if none of the file servers was successfully connected.
20 UNABLE TO
LOGIN
A failure was detected when the HP Jetdirect print server tried to log onto the file server.
This could be caused by the print server object not existing on the file server, or by a
security check that prevents the print server from logging in.
Make sure the file server name and print server object name are correct. Use PCONSOLE
to erase the password for the print server object. Create a new print server object.
When the HP Jetdirect print server is configured for multiple file servers, the error is only
displayed on the configuration page if none of the file servers made the connection.
21 UNABLE TO SET
PASSWORD
A failure was detected when the HP Jetdirect print server tried to set the password for the
print server object. (Whenever the HP Jetdirect print server is able to log in without a
password, it sets the password automatically.) This indicates a networking or security
problem. Create a new print server object.
When multiple file servers are configured, the error is only displayed on the configuration
page if none of the file servers were successfully connected.