![background image](http://html.mh-extra.com/html/hp/jetdirect-250m/jetdirect-250m_user-manual_163690143.webp)
By default, the Telnet interface does not require a user
name or password. If an administrative password has
been set, you will be prompted for a user name and this
password before you can enter and save Telnet
commands.
4
By default, a Command Line interface is provided. To
configure parameters using a Menu interface, enter
Menu
. For more information, see "
User Interface
Options
".
For a list of supported commands and parameters, see "
Telnet
Commands and Parameters
".
User Interface Options
The HP Jetdirect print server provides two interface options to
enter Telnet commands: a
Command Line Interface (Default)
and a
Menu Interface
.
Command Line Interface (Default)
Using the Telnet command line interface, you can set
configuration parameters using the following procedures:
Note
Any time during the Telnet session you can type:?
then press [Enter] to view available configuration
parameters, the correct command format, and a list of
commands.
To list additional (or advanced) commands, enter
the "advanced" command before entering "?".
To display current configuration information, type /
then press [Enter].
1
At the Telnet prompt "
>
" type:
<parameter>: <value>
then press [Enter], where <
parameter>
refers to the
configuration parameter you are defining, and <
value>
refers to the definitions you are assigning to that
parameter. Each parameter entry is followed by a carriage
return.
See
Telnet Commands and Parameters
for configuration
parameters.
2
Repeat the previous step to set any additional
configuration parameters.
3
When you have finished typing the configuration
parameters, type "save", "exit", or "quit" (depending on
your system).
Содержание jetdirect 250m
