![background image](http://html.mh-extra.com/html/hp/jetdirect-250m/jetdirect-250m_user-manual_163690159.webp)
Before you can use LPD printing, your printer must be
properly connected to the network through the HP Jetdirect
print server, and you must have print server status
information. This information is listed on the HP Jetdirect
printer configuration page. If you have not printed a
configuration page from your printer, see the hardware
installation guide for your print server or your printer's getting
started guide for instructions. You must also have the
following:
•
An operating system that supports LPD printing.
•
Superuser (root) or Administrator access to your system.
•
The LAN hardware address (or station address) of the
print server. This address is printed with print server
status information on the HP Jetdirect configuration page
and is of the form:
HARDWARE ADDRESS: xxxxxxxxxxxx
where x is a hexadecimal digit (for example,
0001E6123ABC).
•
An IP address configured on the HP Jetdirect print
server.
Next topic:
Setup overview
Содержание jetdirect 250m
