background image

17 UNABLE TO 
FIND SERVER

(Ethernet) The HP Jetdirect print server was unable to find the NetWare print server 
(Remote Printer mode) or file server (Queue Server mode). (There was no response to 
service queries for advertising print servers or file servers that matched the configured 
print server or file server name.) 
Make sure that the print server or file server is running and that the print server or file 
server name configured on the HP Jetdirect print server matches the actual name used by 
the print server or file server. Also make sure that all cables and routers are functioning 
correctly. 

18 PASSWORD 
ERROR

The HP Jetdirect print server detected that the password for the NetWare print server 
object is wrong. Use a NetWare utility (such as PCONSOLE) to erase the password for the 
print server object. When the HP Jetdirect print server logs on again, it sets a new 
password. 
Note: When multiple file servers are configured, the error is only displayed on the 
configuration page if none of the file servers are connected. 

19 NO QUEUE 
ASSIGNED

The HP Jetdirect print server detected that the print server object has not been assigned 
any queues to service. Assign queues to the print server object using printer installation or 
NetWare utilities. 
Note: When multiple file servers are configured, the error is only displayed on the 
configuration page if none of the file servers were successfully connected. 

1A PRINTER 
NUMBER NOT 
DEFINED

A NetWare printer number for this printer has not been configured. Assign a valid printer 
number to the HP Jetdirect print server. Use a NetWare utility (such as PCONSOLE), the 
Jetdirect embedded web server, or other tool to assign a printer number. 

1B PRINTER 
NUMBER IN USE

The NetWare printer number assigned to the printer is already in use by another printer. 
Assign an unused printer number. This may also occur when a printer is power cycled, in 
which case the error goes away after the print server times out and detects the lost 
connection.

1C PRINT SERVER 
NOT DEFINED

The file server does not have a print server object that corresponds to the specified 
NetWare node name. Use printer installation software, a NetWare utility (such as 
PCONSOLE), or other tool to create the print server object. 
When the HP Jetdirect print server is configured for multiple file servers, the error is only 
displayed on the configuration page if none of the file servers made the connection. 

1D UNABLE TO 
CONNECT TO 
SERVER

Remote Printer mode error: The HP Jetdirect print server was unable to establish an SPX 
connection with the NetWare print server. Make sure that the NetWare print server is 
running and that all cables and routers are functioning correctly.

1E FAIL 
RESERVING 
PRINTER NUM

The SPX connection to the print server was lost when the HP Jetdirect print server 
attempted to reserve the printer number. This indicates a possible network problem, or a 
problem with the print server. Make sure all cables and routers are functioning correctly. 
Try restarting the print server.

1F ERR 
NEGOTIATING 
BUFFER SIZE

A failure was detected when selecting the buffer size to be used when reading print data 
from the file server. This may indicate a network problem. 
When the HP Jetdirect print server is configured for multiple file servers, the error is only 
displayed on the configuration page if none of the file servers was successfully connected. 

20 UNABLE TO 
LOGIN

A failure was detected when the HP Jetdirect print server tried to log onto the file server. 
This could be caused by the print server object not existing on the file server, or by a 
security check that prevents the print server from logging in. 
Make sure the file server name and print server object name are correct. Use PCONSOLE 
to erase the password for the print server object. Create a new print server object. 
When the HP Jetdirect print server is configured for multiple file servers, the error is only 
displayed on the configuration page if none of the file servers made the connection.

21 UNABLE TO SET 
PASSWORD

A failure was detected when the HP Jetdirect print server tried to set the password for the 
print server object. (Whenever the HP Jetdirect print server is able to log in without a 
password, it sets the password automatically.) This indicates a networking or security 
problem. Create a new print server object. 
When multiple file servers are configured, the error is only displayed on the configuration 
page if none of the file servers were successfully connected. 

Содержание jetdirect 250m








































































































































































































































































































Отзывы: