HP jetdirect 250m, Руководство пользователя

Страница: 240 / 295

22 UNABLE TO
CONNECT TO
SERVER
Queue Server mode error: The HP Jetdirect print server could not establish an NCP
connection to the file server. Make sure that the correct file servers are connected.
When multiple file servers are configured, the error is only displayed on the configuration
page if none of the file servers were successfully connected.
23 UNABLE TO
ATTACH TO
QUEUE
A failure was detected when the HP Jetdirect print server tried to attach to one of the
queues assigned to the print server object. This may be because no servers are allowed to
attach to this queue. There may also be a networking or security problem. Use PCONSOLE
to make sure that servers are allowed to attach to the queue, to delete the print server
object from the list of queue servers if you want the HP Jetdirect print server to service
other queues, or to delete the queue and create a new one (the print server object must be
added to the list of queue servers).
When the HP Jetdirect print server is configured for multiple file servers, the error is only
displayed on the configuration page if none of the file servers made the connection.
24 PSERVER
CLOSED
CONNECTION The NetWare print server requested a termination of the connection with the HP Jetdirect
print server. No error exists or is indicated. Make sure the NetWare print server is
running, and restart it if necessary.
25
DISCONNECTING -
SPX TIMEOUT The SPX connection to the print server was lost after the connection had been made. This
indicates a possible network problem, or a problem with the print server. Make sure all
cables and routers are functioning correctly. Try restarting the print server.
26 UNKNOWN NCP
RETURN CODE
The HP Jetdirect print server encountered an unexpected fatal error after it had
successfully connected to the file server. A wide variety of failures could produce this error
message, including a downed file server or a network router failure.
27 UNEXPECTED
PSERVER DATA
RCVD The print server sent some data when the HP Jetdirect print server had not given its
permission to do so. This indicates a possible print server problem, possibly a software
problem.
28 OUT OF
BUFFERS
The HP Jetdirect print server was unable to allocate a buffer from its internal memory.
This indicates all buffers are busy due possibly to heavy broadcast traffic or large amounts
of network traffic directed to the print server.
29 UNABLE TO
SENSE NET
NUMBER
The HP Jetdirect print server has been trying for over 3 minutes to determine the
NetWare protocol used on the network. Make sure that any file servers and routers are
operating correctly. Make sure that the settings for NetWare frame type and source
routing are correct.
2A NDS ERR:
EXCEEDS MAX
SERVERS
More queues were assigned than the HP Jetdirect print server can handle. Remove one or
more print queues from the list to be serviced by Queue Server Mode.
2B NDS ERR:
UNABLE TO
LOGIN Unable to log onto the NetWare directory tree. Make sure that the print server object is
defined in the directory at the correct context. Clear the print server password using
NWADMIN or similar NetWare tool.
2C NDS
AUTHENTICATION
ERROR
Unable to log onto the NetWare directory tree. Make sure that the print server object is
defined in the directory at the correct context.
2D NDS ERR:
CHANGE PSSWRD
FAILED
Cannot modify the print server password to the value expected by the HP Jetdirect print
server.
2E NDS SERVER
PUBLIC KEY
ERROR
Print Server Object Name mismatch. Unable to read the file server's public key. Verify
object names, or contact the NDS administrator.
2F NDS ERR: SRVR
NAME
UNRESOLVD
The file server on the network cannot be located. The server may not be running at this
time or a communications problem may exist.
30 NDS PRINT
SERVER NAME
ERROR
The HP Jetdirect print server object cannot be located in the specified NDS context.