![background image](http://html.mh-extra.com/html/hp/jetdirect-250m/jetdirect-250m_user-manual_163690078.webp)
Notify everyone on your network of the new zone for your
printer so they can select the printer in the Chooser.
Selecting Your Printer
1
Select the
Chooser
from the
Apple
menu.
2
Select the printer icon for use with your printer. If the
appropriate printer icon does not appear in the Chooser,
or you are not sure which icon to select for your printer,
see "
Installing the Printer Software
" in this chapter.
3
If AppleTalk is not active, an alert dialog box appears on
your screen. Select
OK
. The
Active
button turns on.
If your network is linked to other networks, the
AppleTalk
Zones
list dialog box appears in the Chooser.
4
If applicable, select the zone in the
AppleTalk Zones
scrolling list where your printer is located.
5
Select the printer name you want to use from the list of
printer names in the upper-right area of the Chooser. If
the printer's name does not appear in the list, make sure
the following tasks have been performed:
•
the printer is turned on and is online.
•
the print server is connected to the printer and to the
network.
•
the printer cable connections are secure.
A READY message should appear if the printer has a
control panel display. See the chapter on
"
Troubleshooting during installation
" for more
information.
Note
If your printer is the only name listed in the dialog
box, you must still select it. Your printer remains
selected until you select a different printer with the
Chooser.
6
Click
Setup
or
Create
in the Chooser; then, if prompted,
select the appropriate PostScript Printer Description file
(PPD) for the printer. For more information, see the
online documentation
(HP LaserJet Printing Guide)
.
7
Set
Background Printing
to
ON
or
OFF
.
Содержание jetdirect 250m
