#
# Example of an HP Jetdirect TFTP
Configuration File
#
# Allow only Subnet 192.168.10 access to
peripheral.
# Up to 10 'allow' entries can be written
via TFTP.
# Up to 10 'allow' entries can be written
via Telnet
# or embedded web server.
# 'allow' may include single IP addresses.
#
allow: 192.168.10.0 255.255.255.0
#
#
# Disable Telnet
#
telnet: 0
#
# Enable the embedded web server
#
ews-config: 1
#
# Detect SNMP unauthorized usage
#
authentication-trap: on
#
# Send Traps to 192.168.10.1
#
trap-dest: 192.168.10.1
#
# Specify the Set Community Name
#
set-community-name: 1homer2
#
# End of file
List of Supported TFTP Parameters
lists the supported TFTP
parameters (HP Jetdirect firmware version x.21.01 or greater).
TFTP Configuration File Parameters
describes the TFTP
parameters.
Table 3.2 List of Supported TFTP Parameters
General
•
passwd:
•
sys-location:
•
sys-contact:
TCP/IP Main
•
host-name:
•
domain-name:
•
dns-svr:
•
pri-wins-svr:
•
sec-wins-svr:
•
smtp-svr:
Содержание jetdirect 250m
