![background image](http://html.mh-extra.com/html/hp/jetdirect-250m/jetdirect-250m_user-manual_163690154.webp)
Using Telnet to Erase the Existing IP Address
To erase the IP address during a Telnet session, use the
following command line entries:
1
Type
cold-reset
, then press [Enter].
2
Type
quit
, then press [Enter] to exit Telnet.
Note
This procedure resets all TCP/IP parameters, but only
affects the TCP/IP subsystem. After this has been
done the print server should be power cycled.
Parameters for other subsystems such as IPX/SPX
(Novell NetWare) or AppleTalk are not affected.
To reset all parameters to factory default values,
refer to Troubleshooting the HP Jetdirect Print
Server.
Next topic:
Embedded Web server
Содержание jetdirect 250m
