HP jetdirect 250m, Руководство пользователя

Страница: 148 / 295

idle-
timeout
An integer (1..3600) that specifies the number of seconds an idle
print data connection is allowed to remain open. For example, "idle-
timeout 120" assigns 120 seconds as the desired idle timeout value.
The default is 270 seconds. If set to 0, the connection will not
terminate and other hosts will not be able to make a connection.
telnet-
timeout
An integer (1..3600) that specifies the number of seconds that your
Telnet or FTP session can be idle before it will be automatically
disconnected. The default is 900 seconds. 0 disables the timeout.
CAUTION: Small values, such as 1-5, may effectively disable the use
of Telnet. A Telnet session may terminate before any changes can be
made.
cold-reset
Sets TCP/IP factory default settings. After a cold reset, power cycle
the print server. Parameters for other subsystems, such as IPX/SPX
or AppleTalk, are not affected.
ews-config
Enables or disables the print server's embedded web server. 0
disables, 1 (default) enables.
For more information, see
Using the Embedded Web Server .
tcp-mss
Specifies the maximum segment size (MSS) that the HP Jetdirect
print server will advertise for use when communicating with local
subnets (Ethernet MSS=1460 bytes or more) or remote subnets
(MSS=536 bytes):
0 : (default) All networks are assumed to be local (Ethernet
MSS=1460 bytes or more).
1 : Use MSS=1460 bytes (or more) for subnets, and MSS=536 bytes
for remote networks.
2 : All networks are assumed to be remote (MSS=536 bytes), except
the local subnet.
MSS affects performance by helping to prevent IP Fragmentation
that may result in data retransmission.
tcp-msl
Specifies the maximum segment life (MSL) in seconds. The range is
5 - 120 seconds. The default is 15 seconds.
TCP/IP Diagnostics
Last Config
IP
(Read-only parameter) The IP address of the system from which the
HP Jetdirect print server's IP address was configured.
TCP Conns
Refused (Read-only parameter) The number of client TCP connections that
are refused by the print server.
TCP Access
Denied
(Read-only parameter) The number of times that client systems were
denied access to the print server because there was no allowable
entry in the print server's host access list.
DHCP
Lease Time (Read-only parameter) DHCP IP address lease duration time
(seconds).
DHCP
Renew
Time
(Read-only parameter) DHCP T1 timeout, specifying the DHCP lease
renewal time (seconds).