HP jetdirect 250m, Руководство пользователя

Страница: 97 / 295

IPP Printing
Enable or disable the Internet
Printing Protocol on the HP
Jetdirect print server. If the printer
is properly connected and
accessible, IPP allows printing to
this device over the Internet (or
intranet). A properly configured IPP
client system is also required (see
HP Software Solutions Summary ).
Email (SMTP) Server
Specify the IP address of the
preferred outgoing e-mail Simple
Mail Transport Protocol (SMTP)
server, for use with supported Scan
devices.
Admin Password
For controlled access to configuration and status information
through the embedded web server and Telnet, use this page to
set an Administrative password. If a password is set, you will
be prompted for a user name and this password to access the
HP Jetdirect web pages.
Access Control
This page allows you to create a host access list on the HP
Jetdirect print server. A host access list specifies individual
host systems, or networks of host systems, that will be allowed
to access the print server and the attached network device. Up
to 10 entries can be included on the host access list. If the list is
empty (no hosts are listed), any supported system can access
the print server.
CAUTION Use caution when using this feature. You may
lose your ability to communicate with the HP
Jetdirect print server if your system is improperly
specified in the list.
For use of the host access list as a security
feature, see Security Features.
Host systems are specified by their IP addresses or network
number. If the network contains subnets, a "mask" may be
used to identify whether the IP address designates an
individual host system or a group of host systems.
Examples.