HP jetdirect 250m, Руководство пользователя

Страница: 169 / 295

11 If desired, enter a location and other information for this
printer. Click Next .
12 Choose whether to print a test page, and click Next .
13 Click Finish to close the wizard.
Configuring a Network Printer for Windows
NT 4.0 Systems
At the Windows NT 4.0 system, set up the default printer by
performing the following steps.
1 Click Start , select Settings , and click Printers . The
Printers window opens.
2 Double-click Add Printer .
3 Select My Computer , then click Next .
4 Click Add Port .
5 Select LPR Port , and click New Port .
6 In the Name or address of server providing lpd box, type
the IP address or name of the HP Jetdirect print server.
Note NT clients can enter the IP address or name of the NT
server that is configured for LPD printing.
7 In the Name of printer or print queue on that server box,
type (in lower case)
raw
,
text
, or
auto
. Then click OK .
The HP Jetdirect print server treats "text" files as
unformatted text or ASCII files. Files that are "raw" are
formatted files in PCL, PostScript, or HP-GL/2 printer
languages.
Note For HP Jetdirect external print servers with three
ports, use raw1, raw2, raw3, text1, text2, text3 or
auto1, auto2, auto3 to specify the port.
8 Ensure that the port is selected in the Add Printer list of
the available ports, then click Next .
9 Follow the remaining instructions on the screen to
complete the configuration.
Verifying the Configuration
From within Windows NT, print a file from any application. If
the file prints correctly, the configuration was successful.
If the print job is not successful, try printing directly from DOS
using the following syntax: