HP jetdirect 250m, Руководство пользователя

Страница: 259 / 295

Primary
Frame Type Specifies the frame type selection on the print server.
●
Auto Select: the print server automatically senses and limits the frame type to the first
one detected.
●
EN_II: limits the frame type to IPX over Ethernet frames. All others will be counted and
discarded.
●
EN_802.2: limits the frame type to IPX over IEEE 802.2 with IEEE 802.3 frames. All
others will be counted and discarded.
●
EN_SNAP: limits the frame type to IPX over SNAP with IEEE 802.3 frames. All others
will be counted and discarded.
●
EN_802.3: limits the frame type to IPX over IEEE 802.3 frames. All others will be
counted and discarded.
Network The first column Network indicates the network number associated with each protocol frame
type used for communication between a server and the print server.
●
Unknown: the print server is still trying to determine which network number to use.
Frame Type
EN_II
EN_802.2
EN_SNAP
EN_802.3
The second column Frame Type identifies the frame type associated with each network number.
Unless a specific frame type has been manually configured, the print server automatically
determines the protocol frame type by listening to the network data being transferred over the
network.
●
Disabled: a specific frame type for that network has been manually configured.
Rcvd The third column Rcvd indicates how many packets have been received for each frame type.
Back to Top
Novell NetWare Protocol Information
Provides the current status and parameter values for the Novell Network protocol.
Message Description
STATUS:
Indicates the current Novell NetWare configuration status.
READY: Indicates the HP Jetdirect print server is awaiting data.
DISABLED: Indicates that IPX/SPX was manually disabled.
INITIALIZING: Indicates that the print server is registering the node address or name. An
additional status message may also be displayed.
An
error code and message are displayed if the print server is not ready.
NODE
NAME:
Queue Server Mode: The print server name. This name must match a valid print server on the
appropriate NetWare file server. The default name is NPIXXXXXX, where XXXXXX is the last
six digits of the LAN hardware (MAC) address.
Remote Printer Mode: The name you gave the network printer when you configured the network
printer. The default name is NPIXXXXXX.
NETWARE
MODE:
The mode used by the HP Jetdirect print server.
QUEUE SERVER indicates that the print server receives data directly from the queue.
REMOTE PRINTER, with the printer number following it, indicates that the print server
emulates a Novell NetWare remote printer.
If the printer is not configured, this field displays QUEUE SERVER.