manualshive.com logo in svg

HP E4401B, Руководство программиста

Поделиться
Скачать
HP E4401B Скачать руководство пользователя страница 29

Chapter 1

1-15

Programming Fundamentals

Printer Setup and Operation

6. Press

Printer Type

to access the

Printer Type

menu keys. Press

Auto

to

make the analyzer attempt to identify the connected printer. When
you press

Auto

, the analyzer will respond in one of the three

following ways:

• The

Print Setup

menu will be displayed with the

Auto

key selected

and no new message will be displayed in the display status line.
This indicates that the analyzer has successfully identified the
connected printer and no further setup is required. As long as

Auto

 remains selected in the

Printer Type

 menu, the analyzer will

attempt to identify the printer when the front panel

Print

 key is

pressed.

• The

Print Setup

 menu will be displayed with the

Custom

 key

selected and one of the following diagnostic messages will be
displayed in the display status line:

Unknown printer, Define Custom to set up printer

No printer response, Define Custom to set up

printer

Invalid printer response, Define Custom to set up

printer

This indicates that the analyzer was unable to automatically
identify the connected printer, and

Custom

 has been selected in

the

Printer Type

 menu. Press

Print Setup

,

Define Custom

 to select

specific printer characteristics such as the printer language
(PCL3 or PCL5) and color printing capability. Once you have set
these characteristics to match those of your connected printer, the
printer setup process is complete. As long as

Custom

 remains

selected in the

Printer Type

menu, the analyzer will not attempt to

automatically identify the connected printer when the front panel

Print

 key is pressed.

• The

Print Setup

menu will be displayed with the

None

key selected

and the following message will appear in the display status line:

Unsupported printer, Printer Type set to None

This indicates that the analyzer has successfully identified the
connected printer, but the printer is not supported by the
analyzer. As long as

None

is selected in the

Printer Type

menu, the

analyzer will respond to any print command by displaying the
message

Printer Type is None

 in the display status line.

Содержание E4401B















































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды