![HP E4401B Скачать руководство пользователя страница 262](http://html.mh-extra.com/html/hp/e4401b/e4401b_programmers-manual_161548262.webp)
5-108
Chapter 5
Language Reference
STATus Subsystem
STATus:QUEStionable Subsection
This subsection controls the SCPI-defined status-reporting structures.
Questionable Calibration Condition
:STATus:QUEStionable:CALibration:CONDition?
This query returns the decimal value of the sum of the bits in the
Questionable Calibration Condition register.
NOTE
The data in this register is continuously updated and reflects the
current conditions.
Questionable Calibration Enable
:STATus:QUEStionable:CALibration:ENABle <number>
:STATus:QUEStionable:CALibration:ENABle?
This command determines what bits in the Questionable Calibration
Condition Register will set bits in the Questionable Calibration Event
register, which also sets the Calibration Summary bit (bit 8) in the
Questionable Register. The variable <number> is the sum of the
decimal values of the bits you want to enable.
Factory Preset
and *RST:
32767 (all 1’s)
Range:
0 to 32767
Questionable Calibration Event Query
:STATus:QUEStionable:CALibration[:EVENt]?
This query returns the decimal value of the sum of the bits in the
Questionable Calibration Event register.
NOTE
The register requires that the equivalent PTR or NTR filters be set
before a condition register bit can set a bit in the event register.
The data in this register is latched until it is queried. Once queried, the
data is cleared.
Questionable Calibration Negative Transition
:STATus:QUEStionable:CALibration:NTRansition <number>
:STATus:QUEStionable:CALibration:NTRansition?
This command determines what bits in the Questionable Calibration
Condition register will set the corresponding bit in the Questionable
Calibration Event register when that bit has a negative transition (1 to
0). The variable <number> is the sum of the decimal values of the bits
Содержание E4401B
