manualshive.com logo in svg

HP E4401B, Руководство программиста

Поделиться
Скачать
HP E4401B Скачать руководство пользователя страница 289

ii

The information contained in this document is subject to change
without notice.

Hewlett-Packard makes no warranty of any kind with regard to this
material, including but not limited to, the implied warranties of
merchantability and fitness for a particular purpose. Hewlett-Packard
shall not be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing, performance,
or use of this material.

The following safety symbols are used throughout this manual.
Familiarize yourself with the symbols and their meaning before
operating this instrument.

WARNING

Warning denotes a hazard. It calls attention to a procedure
which, if not correctly performed or adhered to, could result in
injury or loss of life. Do not proceed beyond a warning note
until the indicated conditions are fully understood and met.

CAUTION

Caution denotes a hazard. It calls attention to a procedure that, if not
correctly performed or adhered to, could result in damage to or
destruction of the instrument. Do not proceed beyond a caution sign
until the indicated conditions are fully understood and met.

NOTE

Note calls out special information for the user’s attention. It provides
operational information or additional instructions of which the user
should be aware.

Содержание E4401B















































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды