HP 8530A, Руководство по эксплуатации и программированию, Страница: 41 / 439

Options , Equipment Supplied, A ccessories
Options
Option 005 - P ositioner Encoder Compatibility
Option 005 adds the necessary hardware so the HP 8530A will operate with the
HP 85370A P osition Encoder . If the receiver does not already have a rear panel ENCODER
INTERCONNECT connector , it must be returned to the factory so the rear panel can be
changed.
Option 010 - Time Domain Operation
A dds Time Domain operation. The receiver converts data from the frequency domain to the
time domain (using inverse F ourier transform). The time domain response shows the measured
parameter value versus time . The windowing feature can modify the frequency domain data
to reduce side-lobe levels in the time domain response . Y ou can isolate individual time domain
responses using the gating functions .
Option 011 - A dd HP 8510C Firmware Operating System
Option 011 receivers can run HP 8510C rmware , and a copy of this rmware is supplied. Y ou
can only run one operating system (OS) at a time , either HP 8530A or HP 8510C. T o change
between HP 8530A and 8510C operation, you must load the appropriate operating system from
disc .
When using the receiver as an HP 8510C, refer to the supplied HP 8510C manuals for operating
information.
Option 908 - Rack Mount Kit (for instruments without handles)
This HP 8530A rack mount kit allows you to mount the receiver to a standard 19 inch rack.
The rack anges in this kit are not compatible with front handles . T o obtain this item after
receiving the HP 8530A, order part number 5062-3977 and 5062-3978.
Option 913 - Rack Mount Kit (for instruments with handles)
This HP 8530A rack mount kit allows you to mount the receiver to a standard 19 inch rack.
The rack anges in this kit are compatible with front handles . T o obtain this item after
receiving the HP 8530A, order part number 5062-4071 and 5062-4072.
Option 910 - A dditional Manual Set
This provides an additional manual Set. T o obtain this item after receiving the HP 8530A, order
part number 08530-90001.
Option W31 - Extended Service (On-Site , where A vailable)
Converts the standard warranty to three years of on-site repair service (where available). The
warranty period begins at the time of product delivery . This warranty option does not include
annual calibration.
1-10 General Information