HP 8530A, Руководство по эксплуатации и программированию, Страница: 256 / 439

Disc Functions
Press
NNNNNNNNNNNNNN
MORE to see the following choices:
NNNNNNNNNNNNNNNNNNNNNNNNNNNNN
DATA: RAW
Press this softkey to store the raw data array for the active
channel.
NNNNNNNNNNNNNN
DATA Press this softkey to store the calibrated data array for the
active channel.
NNNNNNNNNNNNNNNNNNNNNNNNNNNNN
FORMATTED Press this softkey to store the formatted data array for the
active channel.
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
DELAY TABLE Press this softkey to store the electrical delay table to disc .
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
USER DISPLAY
Press this softkey to store User Display graphics to disc .
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
HARDWARE STATE
Press this softkey to store multiple source mode settings ,
HP-IB settings for external hardware , and test set (frequency
converter) states .
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
MACHINE DUMP
Press this softkey to store the following instrument registers
to a single disc le:
a. Current instrument state
b. Instrument states 1{8
c. Cal sets 1{8
d. Cal kits
e. Hardware state
f. Memories 1{8
When you load a machine dump from disc , the contents of
these internal registers are replaced with the data from the
machine dump le .
Note: Before saving a machine dump le , store your current
measurement setup in Save Register 8 (the user preset/power
ON register). Later , when that machine dump is loaded,
the receiver will wake up in that state . When a machine
dump le is loaded, the receiver wakes up with whatever is
in Register 8. The machine dump does not automatically
remember your desired setup unless it is stored in Register 8.
4. A \label maker" menu will appear . Notice that the menu has a list of alpha-numeric
characters and a selector arrow . The le name prex for the selected type of data will
already be entered for you.
If you want to overwrite an existing le , press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
REPLACE FILE . A list of the current disc
les will appear on screen. (The receiver will only list the type of les selected in step 3.
F or example , if you are storing a Raw data le , only raw data les will be shown in the
directory listing).
Use the knob or 8 9 keys to select the le you want to replace , then press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
REPLACE FILE .
The instrument will now store the le to disc .
5. If you are creating a new le enter the desired le name as follows:
a. Using the rotary knob , place the cursor under the rst desired letter or number . Press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
SELECT LETTER . If you make a mistake press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
BACK SPACE . Continue until you have
selected all desired characters . Y ou can enter up to seven characters . Note: If saving
to DOS discs , the sixth and seventh characters will become a le name extender . F or
example: RD 12345.67
Disc Drive Operation 15-5