HP 8530A, Руководство по эксплуатации и программированию, Страница: 223 / 439

Instrument State Block
S A VE and RECALL
4
SA VE
5 and 4
RECALL
5 allow you to save and recall up to eight dierent measurement setups
(instrument states). An instrument state is dened as the condition of all current
measurement settings , including all domain, stimulus , parameter , format, and response settings .
When you press 4
SA VE
5 or 4
RECALL
5 , a menu appears which lists the eight Save/Recall registers .
When saving, choose the register you want to hold the instrument state . If an asterisk (*) is
next to the register number , an instrument state is already in that register . If you select a
register that has an instrument state in it, you will overwrite the old instrument state with the
current one .
When you recall an instrument state , current instrument settings change to those dened in the
instrument state . If you save the instrument state to Save/Recall register #8, it becomes the
User Preset state . Refer to \User Preset," at the end of this chapter .
Storing Instrument States to Disc
Y ou can save instrument states to disc , as explained in Chapter 15, Disc Drive Operation.
An instrument state you load from disc does not automatically go into eect. After loading the
instrument state to a register , you must then press 4 RECALL 5 and select that register .
USER PRESET
Y ou can save your current setup as the \USER PRESET" state by saving it to Save register 8.
The receiver will return to that state whenever the instrument is turned on, or if you press
4 USER PRESET 5 .
11-4 Instrument State Block