HP 8530A, Руководство по эксплуатации и программированию, Страница: 364 / 439

Programming Examples
Example Program Listing
The following pages contain the program listing for the HP B ASIC examples program. The
program itself is supplied on the HP 8530A Software T oolkit Disc, supplied with the receiver .
The name of the program is: 8530_PROGX
The program requires B ASIC 5.0 or higher with the following binaries: IO , MA T , TRANS, and
COMPLEX.
The program contains many example routines , which show how to perform various
programming tasks . The program requires B ASIC 5.0 or higher with the following binaries: IO ,
MA T , TRANS, and COMPLEX.
The disc also contains three measurement data les that are accessed by some of the
programming example routines .
ANG360
ANG180_SUM
ANG180_DEL
These are data les containing angle domain measurement data.
The following examples are provided in the program:
1 Input Syntax F amiliarization
2 A ctive Function Output
3 Marker Data Output
4 Marker Operations
5 Display Modes
6 Using = Marker
7 Trace Data Output and Input
8 FORM 1 Data Conversion
9 Using Disc
10 Plots Using Copy
11 Trace List to Printer
12 Print/Plot to Receiver System Bus (using pass-through mode)
13 Plot User Graphics HP-GL
14 Plot to User Display Using B ASIC HP-GL
15 Redene P arameter
16 Read and Output Caution/T ell Message
17 Read and Output Status Bytes
18 Output Key Code
19 HP-IB Triggered Data A cquisition
20 W ait Required
21 W ait Not Required.
22 Frequency List
23 Learn String
24 Input Floating P oint (FORM3) or ASCII (FORM4) Trace Data
25 T able Delay Operations
26 F AST (CW ,AD ,D) Data A cquisition
27 F ast IF Multiplexing Operation
HP-IB Programming 18-35