HP 8530A, Руководство по эксплуатации и программированию, Страница: 272 / 439

CITIle Reference
T able 15-6. Network Analyzer/Receiver Statements
Statement Explanation
#NA ARB_SEG x y p A list segment, as entered by the user .
xx = start value
y = stop value
p = number of points
#NA CAL_TYPE cc The type of calibration used:
Where cc = 1 through 5:
1 = response cal.
2 = response and isolation cal.
3 = one port cal on port #1.
4 = not used
5 = not used
6 = antenna calibration
7 = RCS calibration
#NA CW_FREQ frequency The CW frequency of an Angle Domain measurement. This is a
\write only" command. When a CITIle is loaded, the receiver
will NOT read this line , and it will NOT change the current CW
frequency .
#NA DUPLICATES dd \Delete duplicates" ag. Determines if points listed more then
once should be measured more then once .
If dd = 0, then points listed more then once are measured as
many times as they are listed.
If dd = 1, then a particular point is measured once .
#NA FREQ_INFO ii The frequency information ag.
If ii = 0, then frequency information is not displayed on the
instrument's screen.
If ii = 1, then frequency information is displayed on the
screen.
#NA IF_BW gg The IF bandwidth setting of the receiver .
gg = IF bandwidth in Hertz.
Disc Drive Operation 15-21