edge switch 2/24 service manual
2–85
Diagnostics
d. At the Hardware View for the first switch reporting the problem, click Configure
and select Operating Parameters. The Configure Operating Parameters
dialog box displays.
e. Type the customer-determined preferred domain ID value, then click Activate.
f. Repeat steps d and e at the Hardware View for the switch attached to the
segmented E_Port (second switch). Use a different preferred domain ID value.
g. Set both switches online (
Set the Switch Online or Offline on page 3–23
).
Did the domain ID change solve the problem and did both switches join through the
ISL to form a fabric?
NO
YES
↓
The switch, associated ISL, and multiswitch fabric appear operational. Exit
MAP.
Contact the next level of support. Exit MAP.
16
A switch E_Port segmented because two switches had incompatible zoning
configurations. An identical zone name is recognized in the active zone set for both
switches, but the zones contain different members.
a. Work with the system administrator to determine the desired zone name change
for one of the affected switches. Zone names must conform to the following rules:
•
The name must be 64 characters or fewer in length.
•
The first character must be a letter (a through z), upper or lower case.
•
Other characters are alphanumeric (a through z or 0 through 9), dollar
sign ($), hyphen (-), caret (^), or underscore (_).
b. Close the Product Manager application (Hardware View). The main HAFM
window or Products View (still active) displays.
c. Select the Fabrics tab. In the left pane of the Fabrics View window, select the
fabric of which the switch is a member. The Fabrics View displays with the
default Topology tab active.
d. Select the Zone Set tab at the bottom of the window. The Zone Set View
displays with the active zone set shown (
Figure 2–16
).
