horiba SF-1U, Инструкция по эксплуатации

Страница: 58 / 60

E-V
⑤
While in the standby condition, the equipment receives an E or P command or the low
battery voltage alarm is generated:
Further, while in the standby condition -with the low battery voltage alarm being
generated, the equipment receives an E, R, S or P command:
The equipment returns the state of being in standby condition, present parameter
settings and alarm condition.
Order Format Delimiter Response data description
1 "STP2" <CR> In standby condition
2
"ST.T_25.0" <CR> Calibration temperature
※
”_” indicates blank. "ST.T__0.0" <CR>
3
"MJ.T_25.4" <CR> Measured temperature
※
”_” indicates blank. "MJ.T__9.4" <CR>
4
"AT.P1070.0" <CR> Set atmospheric pressure
※
”_” indicates blank. "AT.P_730.0" <CR>
5
"A0" <CR> When no error occurs.
"A4" <CR> Low voltage alarm
Data formats 2, 3, 4 and 5 above:
2 Depending on whether the calibration temperature is 10.0
℃
or greater or less than 10.0
℃
,
the equipment selects from 2 and returns the data.
3 Depending on whether the measured temperature is 10.0
℃
or greater or less than 10.0
℃
,
the equipment selects from 3 and returns the data.
4 Depending on whether the set atmospheric pressure is 1000.0 hPa or greater or less than
1000.0 hPa, the equipment selects from 4 and returns the data.
5 If no error has occurred, the equipment selects “A0”. If the low voltage error occurred or is
occurring, the equipment selects “A4” and returns the data.