horiba SF-1U, Инструкция по эксплуатации

Страница: 40 / 60

E-5
①
Measurement gas inlet Hose connection to measurement gas. And this is also used for pouring or
draining filming liquid.6.1.4,6.1.5
②
Measurement gas outlet Hose connection for exhausting measurement gas.6.1.5
③
Liquid level window For monitoring level of filming liquid.
⇒
6.1.4
④
Start detector Film detector for starting time measurement.
⑤
Stop detector
Film detector for stopping time measurement.
⑥
Measuring tube window For monitoring measuring tube in order to check the condition of film or dirt
inside the tube.
⑦
Film removal paper port Port for putting in paper to remove liquid or film.6.1.5
⑧
Signal connector
(SERIAL)
For connecting printer or control signals by PC. The optional dedicated cable
is needed to connect printer or PC.
⑨
Power connector
(DC7VIN)
Connector for dedicated AC adapter.
⇒
6.1.2
⑩
Power switch
(POWER)
Switch for turning on/off.6.1.7
⑪
Fixing lever
Lever for fix/release the measuring unit.6.1.3
⑫
Display

Flow rate
Significant digit: 4 digits
Unit selection: 999.9 ml/min or less - unit in ml/min
1000 ml/min or more - unit in ml/min
Mode display:
Normal measurement
ｄ−：
Automatic measurement
ｄ※：
（※
shows number of counts of automatic measurement.
2
〜
A, “A” means 10times
）

Temperature Significant digit: Significant digit:1
st
decimal place
Operation: Real time display
(No hold when measurement is completed.)
Display range:
5.0
〜
40.0°C
(Temperature accuracy guaranteed 15
〜
35
℃
)
Mode display:
「１： ※※.※℃

Timing Significant digit: 4 digits

Atmospheric
pressure
Significant digit: Significant digit:1
st
decimal place
Operation: Real time display
(No hold when measurement is completed.)
Display range
730 to 1070 hPa (
Range of atmospheric pressure
measurement:
930 to 1040 hPa)
Mode display:
Manual input
Ｈ．※※※※.※hPa
Atmospheric pressure measurement
Ａ．※※※※.※hPa
（
SF-1U has only manual input function.
）

Alarm
Ａ１：−−−−
Start detector detects abnormality.
⇒
8.2
Ａ２：−−−−
Stop detector detects abnormality.
⇒
8.3
Ａ３：−−−−
Detector luminous energy is low.
⇒
8.4
Ａ４：−−−−
Voltage is low.
⇒
8.5
Ａ１：−−−Ａ
Automatic wetting error
⇒
8.2

Calibration
temperature
「０： ※※．※ （※
shows calibration temperature.
）⇒
6.1.6
Significant digit: 1
st
decimal place.
Range setting:
0
〜
35.0°C

Miscellaneous Automatic
measurement
count
ＡＵ：＿＿※※（※s
hows measurement count 02 to 10.
）
Display only when automatic measurement count is
entered.
⇒
6.2.3
Automatic
wetting operation
ｄＰ：−−−− ⇒
6.2.1
Alarm time
setting
Ａ１： ※※※
sec A1 alarm time setting
Ａ２： ※※※
sec A2 alarm time setting
（※
shows time setting.
）⇒
6.4,8.2, 8.3
⑬
Unit indicator LED indicates the unit of value display shows.
⑭
SET key
For various settings and calling up automatic measurement data.
⑮
SELECT key For selecting display and set items.
⑯ AUTO key For selecting automatic measurement mode. Automatic measurement mode
is ready when LED on this key is lighted.
⇒
6.2.3
⑰
START key
Besides starting measurement/automatic measurement, this includes
functions such as alarm reset, measurement stop and automatic wetting.