horiba SF-1U, Инструкция по эксплуатации

Страница: 56 / 60

E-III
2.3. Communication commands (SF to CPU)
※
Make the host computer ready to receive commands all the time.
①
When a normal or automatic measurement event in response to S commands is
completed normally:
The equipment returns measurement results in following order.
Order Format Delimiter Response data description
1
"FRML123.4" <CR> Normal measurement Measurd flow rate of less than
1L/min
Position of decimal point in
each flow rate range:
0.000
〜
9.999ml/min
10.00
〜
99.99ml/min
100.0
〜
999.9ml/min
※
The colon “:” is a data
delimiter. First data shows
mean value followed by data
of each measurement event
from first to tenth.
"FRML123.4:123.4:123.4" <CR> Two automatic
measurement
"FRML123.4:123.4:123.4:123.4" <CR> Three automatic
measurement
⋮
⋮
⋮
⋮
⋮
⋮
"FRML123.4:123.4:123.4:123.4
:123.4:123.4:123.4:123.4
:123.4:123.4:123.4" <CR> Ten automatic
measurement
"FRL1.234" <CR> Normal measurement Measurd flow rate of less than
1L/min
Position of decimal point in
each flow rate range:
1.000
〜
9.999L/min
10.00
〜
L/min
※
The colon “:” is a data
delimiter. First data shows
mean value followed by
data of each measurement
event from first to tenth.
"FRL1.234:1.234:1.234" <CR> Automatic
measurement twice
"FRL1.234:1.234:1.234:1.234" <CR> Automatic
measurement 3times
⋮
⋮
⋮
⋮
⋮
⋮
"FRL123.4:123.4:123.4:123.4
:123.4:123.4:123.4:123.4
:123.4:123.4:123.4" <CR> Automatic
measurement 10times
2
"TIME12.54" <CR> Normal measurement Measurement duration
Position of decimal point in
each time range:
0.000
〜
9.999sec
10.00
〜
99.99 sec
100.0
〜
999.9sec
※
The colon “:” is a data
delimiter. First data shows
mean value followed by data
of each measurement event
from first to tenth.
"TIME12.54:12.54:12.54" <CR> Automatic
measurement twice
"TIME12.54:12.54:12.54:12.54" <CR> Automatic
measurement 3times
⋮
⋮
⋮
⋮
⋮
⋮
"TIME12.54:12.54:12.54:12.54
:12.54:12.54:12.54:12.54
:12.54:12.54:12.54" <CR> Automatic
measurement 10times
3
"ST.T_25.0" <CR> Satndard calibration temprature
※
”_” indicates blank.
"ST.T__0.0" <CR>
4
"MJ.T_25.4" <CR> Measured temprature
※
”_” indicates blank.
"MJ.T__9.4" <CR>
5
"AT.P1070.0" <CR> Set atmospheric pressure
※
”_” indicates blank.
"AT.P_730.0" <CR>
Data formats for 1,2,3,4 and 5 above:
1 Depending on the frequency of automatic measurement and the range of measured flow
rate, the equipment selects from 1 and returns the data.
2 Depending on the frequency of automatic measurement and the range of measured flow
rate, the equipment selects from 2 and returns the data.
3 Depending on whether the calibration temperature is 10.0
℃
or greater or less than
10.0
℃
, the equipment selects either 3 and returns the data.
4 Depending on whether the measured temperature is 10.0
℃
or greater or less than
10.0
℃
, the equipment selects either 4 and returns the data.
5 Depending on whether the set atmospheric pressure is 1000.0 hPa or greater or less than
1000.0 hPa, the equipment selects from 5 and returns the data.