Honeywell SmartVFD HVAC MR4, Руководство пользователя

Страница: 122 / 164

HVAC A
PPLICATION
Honeywell
• 50
3.5.11 Group 3.9: Protections
Table 36. Protections settings
Code Parameter Min Max Unit Default ID Description
M3.9.1
Response to Analog
input low fault
0 4 0 700
0=No action
1=Alarm
2=Alarm, set preset fault fre-
quency (par. M3.3.19)
3=Fault (Stop according to
stop mode)
4=Fault (Stop by coasting)
M3.9.2
Response to external
fault
0 3 2 701
0 = No action
1 = Alarm
2 = Fault (Stop according to
stop mode)
3 = Fault (Stop by coasting)
M3.9.3
Response to Input
phase fault
0 3 3 730 See above
M3.9.4 Undervoltage fault 0 1 0 727
0 = Fault stored in history
1 = Fault not stored in history
M3.9.5
Response to output
phase fault
0 3 2 702 See M3.9.2
M3.9.6
Motor thermal protec-
tion
0 3 2 704 See M3.9.2
M3.9.7
Motor ambient temper-
ature factor
-20.0 100.0 °C 40.0 705 Ambient temperature in °C
M3.9.8
Motor thermal zero
speed cooling
5.0 150.0 % Varies 706
Defines the cooling factor at
zero speed in relation to the
point where the motor is run-
ning at nominal speed with-
out external cooling.
M3.9.9
Motor thermal time
constant
1 200 min Varies 707
The time constant is the time
within which the calculated
thermal stage has reached
63% of its final value.
M3.9.10
Motor thermal loadabil-
ity factor
0 150 % 100 708
M3.9.11 Motor stall fault 0 3 0 709 See M3.9.2
M3.9.12
Underload fault (bro-
ken belt/dry pump)
0 3 0 713 See M3.9.2
M3.9.13
Response to Fieldbus
communication fault
0 4 3 733 See M3.9.1
M3.9.14
Slot communication
fault
0 3 2 734 See M3.9.2
M3.9.15 Thermistor fault 0 3 0 732 See M3.9.2
M3.9.16 Soft fill timeout 0 3 2 748 See M3.9.2
M3.9.17
Response to PID1
supervision fault
0 3 2 749 See M3.9.2
M3.9.18
Response to PID2
supervision fault
0 3 2 757 See M3.9.2