Honda CB HORNET 160R 2015, Руководство по ремонту

Страница: 301 / 336

17-1
17. LIGHTS/METERS/SWITCHES
17
COMPONENT LOCATION 17-0
SYSTEM DIAGRAM 17-0
SERVICE INFORMATION 17-1
HEADLIGHT 17-2
BRAKE /TAIL LIGHT 17-3
TURN SIGNAL LIGHTS 17-4
COMBINATION METER 17-5
SPEEDOMETER VS SENSOR 17-7
TACHOMETER 17-8
DIGITAL METER RESET PROCEDURE 17-9
COMBINATION SWITCH 17-10
HANDLEBAR SWITCHES 17-11
LEFT HANDLEBAR SWITCH 17-11
BRAKE LIGHT SWITCH 17-12
NEUTRAL SWITCH 17-12
FUEL GAUGE/FUEL LEVEL SENSOR 17-14
HORN 17-16
PASSING RELAY 17-16
TURN SIGNAL RELAY 17-17
FUSE BOX 17-18
SERVICE INFORMATION
GENERAL
• A halogen headlight bulb becomes very hot while the headlight is “ON”, and remains hot for a while after it is turned “OFF”.
Be sure to let it cool down before servicing.
• Note the following when replacing the halogen headlight bulb.
–
Wear clean gloves by replacing the bulb. Do not put finger prints on the headlight bulb, as they may create hot spots on
the bulb and cause it to fail.
–
If you touch the bulb with your bare hands, clean it with a cloth moistened with alcohol to prevent its early failure.
– Be sure to install the dust cover after replacing the bulb.
•
Keep all flammable materials away from the electric heating element. Wear protective clothing, insulated gloves and eye
protection.
•
Check the battery condition before performing any inspection that requires proper battery voltage.
•
A continuity test can be made with the switches installed on the motorcycle.
• The following color codes are used throughout this section.
L = Blue G = Green Lg = Light green R = Red
B = Black Gr = Gray O = Orange W = White
Br = Brown Sb = Sky blue P = Pink Y = Yellow
SPECIFICATIONS
Fuel level sensor mounting nut 9 N.m (0.9 kgf.m, 7 lbf.ft) Page 17-16
TORQUE VALUES
ITEM SPECIFICATION Page NO.
Bulb
Headlight (Hi/low beam) 12V – 35/35W
–
Position light
12V - 5W X 2
–
Brake/tail light (LED) 2 W (LED)*9
–
Turn signal light
12V - 10W x 4
–
Instrument light 140 mcd LED*6
–
Turn signal indicator
56 mcd LED
–
High-beam indicator 28 mcd LED
–
Tail light
0.3 W (LED)*9
–
Neutral indicator
56 mcd LED
–
Fuse
Main
20A
–
Sub 15A & 5A –
Fuel level sensor
Full
6 – 9 W
Page 17–14
Empty
90 – 96 W
Page 17–14