Honda CB HORNET 160R 2015, Руководство по ремонту

Страница: 133 / 336

8-5
CYLINDER/PISTON
Measure the piston pin O.D. at three points.
SERVICE LIMIT: 13.96 mm (0.550 in)
Calculate the piston-to-piston pin clearance.
SERVICE LIMIT: 0.04 mm (0.002 in)
Measure the connecting rod small end I.D.
SERVICE LIMIT: 14.06 mm (0.554 in)
Calculate the connecting rod small end-to-piston pin
clearance.
SERVICE LIMIT: 0.10 mm (0.004 in)
Using a piston, push the ring securely into the cylinder and
measure the end gap using a feeler gauge.
SERVICE LIMITS:
Top: 0.40 mm (0.016 in)
Second: 0.40 mm (0.016 in)
Oil: 0.85 mm (0.033 in)
FEELER GAUGE
PISTON PIN
CONNECTING ROD
PISTON RING
PISTON RING
CYLINDER
Inspect the piston rings, and replace them if they are worn.
Reinstall the piston rings into the piston grooves.
Push in the ring until the outer surface of the piston ring
is nearly flush with the piston and measure the clearance
using a feeler gauge.
SERVICE LIMITS:
Top: 0.10 mm (0.004 in)
Second: 0.10 mm (0.004 in)
Always replace
the piston rings
as a set.