Hofmann geodyna 8200, Руководство оператора

Страница: 122 / 184

122
....... ............... ........
5-81
5-82
5-83
5-84
8
Operation
Message E9
Message
E9
means that at least one error has occurred
during the optimisation cycle (System messages

7.1).

Abort the optimisation program by pressing the
STOP
key and, if desired, start optimisation once
again.
Figure 5-81 OPTIMISATION “
12
”
(fourth measuring run with tyre)

Clamp the wheel.

Position the valve so that it is exactly perpendicular
to and above the chuck.

Confirm the valve position by pressing key 8 .
The OPTIMISATION “13” screen appears ( Fig. 5-82 ).
Figure 5-
82 OPTIMISATION “
13
”
START is signalled on the screen

Perform the wheel measuring run.
A measuring run is performed.
The BALANCING screen appears ( Fig. 5-83 ).
Finish weight Optimisation
Figure 5-83 BALANCING

Balance the wheel according to the readings.
Fig. 5-84
If the silent wheel running conditions are optimal, the
following codes can be displayed:
H0
Silent wheel running conditions cannot be
improved by optimisation.
H1
Further optimisation not recommended but possible.
H2
Weight minimisation is recommended, optimisation
can achieve no further improvement.
....... ........