Hitachi SJ Series, Руководство пользователя

Страница: 448 / 786

12-25-1
Chapter 12
About the inverter function
12.25 What you can achieve by
externally outputting signals
12.25.1 Using the output signal function
externally
• I want to detect warning signals, error signals, and
state signals issued by the inverter with an external
system.
• Output terminals 11 to 15 are used for open
collector output, and Relay output terminals 16 and
17 are used for relay output. Relay output 16
serves as a contact a relay, and Relay output 17
serves as a contact c relay.
Parameters
Terminals corresponding to parameters
• To use the contact c relay, please check the control
circuit power supply and the relay output terminals
whether they are turned on or off.
• For the content of an output signal, by allocating
the functions that you want to output to [CC-01] to
[CC-07], you will be able to allow the
corresponding output terminal contacts to operate.
• You can switch an output signal level with the
Contacts a/b selection functions of [CC-11] to
[CC-17].
Item Parameter Data Description
Output terminal
function selection
[CC-01]~[CC-05]
Next item: Table
of output terminal
selections
Outputs the allocated function to the
corresponding output terminal.
Relay output
terminal function
selection
[CC-06]
Relay output
terminal function
selection
[CC-07]
Output terminal
function selection
[CC-11]~CC-15] 00 Operates as Contact a (NO).
Relay output
terminal function
selection
a/b (NO/NC)
selection
[CC-16]
01 Operates as Contact b (NC).
Relay output
terminal function
selection
a/b (NO/NC)
selection
[CC-17]
Ｑ
Ａ
！
16A 16C
Relay
output
terminals
11 12 13 14 15 CM2
Output
terminals
AL2 AL1 AL0
Alarm relay
output terminals
[CC-07]
[CC-06]
[CC-05]
[CC-04]
[CC-03]
[CC-02]
[CC-01]